Products
Stainless steel water pipes
Pipes are made of food grade stainless steel 304/316L. The internal surface is smooth, without burrs, which ensures low hydraulic resistance and low tendency to form deposits. The pipes are especially suitable for heating and hot water systems in cold regions. Welding is performed using automatic argon arc welding, the seams are smooth and tight.
Description
marker
Stainless steel water pipes
Pipes are made of food grade stainless steel 304/316L. The internal surface is smooth, without burrs, which ensures low hydraulic resistance and low tendency to form deposits. The pipes are especially suitable for heating and hot water systems in cold regions. Welding is performed using automatic argon arc welding, the seams are smooth and tight. Working pressure - up to 1.6 MPa. The bends are made by mandrel bending, which ensures smooth bending without flattening and reduces hydraulic shock. The entire pipe system can be safely operated in a temperature range from -40 °C to +200 °C. These pipes are an ideal replacement for traditional galvanized pipes.
contact us
Related Popular Products
Steel building structures
This is one of our core competencies. Based on our experience with large enterprises such as Changan and Weichai, we specialize in the construction of heavy steel frames for buildings with long spans and high loads. From single-span (portal) frames to multi-story steel frame structures, we not only ensure that the stringent load-bearing requirements of large equipment (such as stamping lines and general assembly) are met, but also that they are fully compatible with complex industrial piping and crane girder systems.
Oil pan
This oil pan is manufactured using solid stamping technology with uniform wall thickness and strong welds, which effectively prevents oil leakage and vibration fatigue damage. Specially designed for use in low temperature environments using steel that is resistant to cold brittle fracture. The lower part is reinforced with stiffening ribs, increasing impact strength.
Painted steel window with poured thermal insulation series 65
Elimination of fragile composite joints. The technology used is one-piece cold bending with 32 runs - the same as in the manufacture of side members for automobile frames. Wind load level - up to 9 (maximum). The windows confidently withstand hurricanes and snowstorms in Siberian conditions.
Painted steel window with poured thermal insulation series 50
Elimination of fragile composite joints. The technology used is one-piece cold bending with 32 runs - the same as in the manufacture of side members for automobile frames. Wind load level - up to 9 (maximum). The windows confidently withstand hurricanes and snowstorms in Siberian conditions.
Curtain facade system
Our façade system is designed taking into account the harsh Russian realities. A durable “steel load-bearing frame” made of galvanized steel provides maximum resistance to wind loads (class 4) and guarantees the building’s seismic safety.
Modular windows and doors made of colored steel 75 series
On the outside there is an indestructible steel sheet with a polymer coating, on the inside there is a warm and pleasant-looking multi-chamber PVC profile, and between them there is a highly effective polyurethane layer that reliably breaks cold bridges. The strength of steel and the thermal insulation of plastic are ideally combined, completely solving the problems of condensation and frost heaving.
Modular windows and doors made of colored steel 65 series
The technology was created as part of R&D initiated by the Ministry of Construction of the People's Republic of China. These are not just windows, but the result of the introduction of scientific achievements at the state level. Each window carries the technical authority of the enterprise - the developer of state standards of the People's Republic of China.
Modular windows and doors made of colored steel 120 series
Specially developed for “gold” and “silver” green buildings. High air permeability (class I–II) and water resistance (class III) help buildings easily pass environmental certification according to GOST standards, setting new trends in energy saving in Russian construction.
Brackets
This series of brackets is made according to a modular principle, which ensures quick installation and flexible adjustment. The brackets are suitable for fixing various industrial equipment. The main material is high-strength Q345B steel, the load-bearing capacity significantly exceeds industry standards. The thickness of the zinc coating is at least 80 microns, which guarantees protection against corrosion caused by deicing agents in Siberian winter conditions.
Engine base
This engine base, which serves as the foundation of the entire power plant, is made using thick sheet welding technology. The design has high rigidity and effectively absorbs and distributes vibration energy during operation. The lower part has adjustable holes for anchor bolts, which allows you to compensate for surface unevenness. The top has standard mounting interfaces compatible with major motor types.
GVU valve block
Designed for heavy-duty power applications, the GVU valve block is precision cast from high-strength alloy steel. The surface of the block undergoes a special anti-corrosion treatment, which ensures structural stability and tightness even at temperatures down to -50 °C.
Fencing
This fencing system has a double anti-corrosion coating: hot-dip galvanizing + powder painting. Fences can be used for a long time in conditions of coastal salt fog or industrial pollution without fading or peeling. The distance between the posts and the height of the horizontal handrails strictly comply with GOST safety requirements. The design is anti-climbing, effectively preventing accidental falls.
Steel bed
This steel bed is welded from cold-rolled square tubes. The design is stable, does not make creaks, and can withstand loads of up to 300 kg or more. The surface is treated with electrostatic spraying - the coating has high adhesion, wear resistance and scratch resistance, does not peel off or rust even in conditions of high humidity or low temperatures.
Modular windows and doors made of colored steel 60 series
Say goodbye to high energy costs! Thanks to the 75 series of five-chamber construction with double polyurethane filling, the heat transfer coefficient reaches only 0.89 W/(m² K), which significantly exceeds the requirements of the new Russian energy efficiency standards of 2025. Your home remains warm and cozy even at -50 °C.